Jump to content

Photo

widescreen AR0100.wed/bif error on gog linux planescape torment

widescreen linux planescape torment

5 replies to this topic

#1 radwulf

radwulf
  • Members
  • 7 posts

Posted 06 May 2012 - 10:43 AM

I'd appreciate some help on this. Firstly, I know what the AR0100.wed error is for, its a location error. I can get widescreen PT working on Win7 and with wine on Ubuntu 12.04 but I no longer use Win7 and it's really slow with wine on Ub, especially as I intend on modding BG later. As it's GOG it's a patched full install with correct torment.ini. Using tolower and WeInstall I can install the fix, ub and tweak mods but not widescreen. I've used tolower to put everything in lower case on a vanilla install through playonlinux and acquired the linux.ini (which is wrong). WeInstall widescreen fails with Ar0100.wed/bif error so the paths are incorrect.

Default installation is in: /home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment

torment.ini is:


HD0:=C:\PlanescapeTorment\
CD1:=C:\PlanescapeTorment\data\
CD2:=C:\PlanescapeTorment\data\
CD3:=C:\PlanescapeTorment\data\
CD4:=C:\PlanescapeTorment\data\
CD5:=C:\PlanescapeTorment\data\

linux.ini (modified) is:

CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/
CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/

log:

rafe@rafe-personal:~$ cd /home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment
rafe@rafe-personal:~/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment$ WeInstall widescreen
WeiDU --tlkout dialog.tlk --ftlkout dialogf.tlk --log setup-widescreen.debug widescreen.tp2 setup-widescreen.tp2 widescreen/widescreen.tp2 widescreen/setup-widescreen.tp2
[WeiDU] WeiDU version 23100
[WeiDU] Using scripting style "PST"

Choose your language:
0 [English]
1 [Francais (Isaya & Lothringen)]
2 [Spanish (ghildrean & Ancalagon el Negro)]
3 [Russian by Prowler & Njkzy (arcanecoast.ru)]
4 [Italiano]
0
Using Language [English]

Would you like to display the readme? [Y]es [N]o
n

Install Component [Widescreen Mod]?
[N]o, [Q]uit or choose one:
1] for the original Infinity Engine (CHOOSE THIS!)
2] for GemRB
1

Installing [for the original Infinity Engine (CHOOSE THIS!)] [Widescreen Mod v3.02]
Creating 1 directory

Enter your X coordinate. It should be a number, >= 640.
1366

Enter your Y coordinate. It should be a number, >= 480.
768

If you have games saved at another resolution and don't update them,
they will be unusable. If you update them, all visited areas will be marked
as not explored.

Do you want to update your save games? Y/N
y

Do you want to enable support for multiple resolutions? Y/N
n

Game resolution: 1366 x 768; save resolution: 1366 x 768; updating saves: y

Are you sure? Y/N
y
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 18 files ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying and patching 1 file ...
Copying 1 file ...
Copying and patching 123 files ...
ERROR: BIFF [./AR0100.BIF] cannot be loaded: Unix.Unix_error(20, "stat", "./ar0100.bif")

ERROR locating resource for 'COPY'
Resource [AR0100.WED] not found in KEY file:
[./chitin.key]
Stopping installation because of error.
Stopping installation because of error.
Stopping installation because of error.
Stopping installation because of error.



You need to perform a full install of your game and make sure that the .ini points to the correct paths.

Posts reporting this problem WILL BE IGNORED unless you can prove you're under exceptional circumstances.


Stopping installation because of error.
Stopping installation because of error.
Stopping installation because of error.
Stopping installation because of error.

ERROR Installing [for the original Infinity Engine (CHOOSE THIS!)], rolling back to previous state
Will uninstall 53 files for [widescreen/widescreen.tp2] component 0.
Uninstalled 53 files for [widescreen/widescreen.tp2] component 0.
ERROR: Failure("resource [AR0100.WED] not found for 'COPY'")
PLEASE post the contents of the file setup-widescreen.debug to this forum: http://bit.ly/hf2XsG
Using Language [English]



I think that all the paths are right. I can't see what's the problem. Can anyone help with this? Thanks for any help in advance.

#2 Isaya

Isaya
  • Members
  • 159 posts
  • Gender:Male
  • Location:Plaisir, France

Posted 09 May 2012 - 12:13 PM

If you actually wrote what you show us in the Linux torment.ini, that's where the error is. You spelled everything as CD1:= instead HD0:=, CD1:= and so on.

#3 radwulf

radwulf
  • Members
  • 7 posts

Posted 12 May 2012 - 09:46 AM

Thanks for the response. Yes that is what I wrote. The reason for that is the tutorial at http://www.neant.ro/...rment-on-linux/ where it says that using CD1 for all entries works fine. I've also tried setting up the linux.ini as:-


HD0:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/
CD1:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD2:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD3:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD4:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/
CD5:=/home/rafe/.PlayOnLinux/wineprefix/planescapetorment_gog/drive_c/PlanescapeTorment/data/

It still doesn't work.

#4 plainab

plainab

    Sasha al'Therin

  • Modders
  • 1717 posts
  • Gender:Male
  • Location:Lost on the Sword Coast

Posted 12 May 2012 - 10:21 AM

you said you followed the instructions on that site... according to the instructions there the linux.ini might come out wrong. did you check your paths to make sure they were pointing to the proper location on disk?

relevant section of the linked instructions.
Spoiler

My working mods:
an AI Party Script for BG2 game engine DOWNLOAD LINK ONLY!
Interactive Tweaks for BG series with some IWD support. DOWNLOAD LINK ONLY!
Rest For 8 Hours an IWD mod
-------------------------------------------
My contributions: BG1Fixpack, BG1Tweaks
On Hold: Solestia an NPC for SOA
-------------------------------------------
My website: http://sasha-altheri...s.com/index.htm

#5 radwulf

radwulf
  • Members
  • 7 posts

Posted 14 May 2012 - 04:53 AM

The website's right in that the linux.ini can come out wrong by default. For me it was:


CD1:=/home/rafe/.wine/dosdevices/../drive_c/PlanescapeTorment/
CD1:=/home/rafe/.wine/dosdevices/../drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.wine/dosdevices/../drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.wine/dosdevices/../drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.wine/dosdevices/../drive_c/PlanescapeTorment/data/
CD1:=/home/rafe/.wine/dosdevices/../drive_c/PlanescapeTorment/data/

This is wrong and doesn't work. The linux.ini that I put up on the site was the one that I modified to what I thought were the correct paths, but no luck. I'm currently trying a pure wine install to see if the problem is compatibility with playonlinux.

Edit: Same issue with pure wine.

Edited by radwulf, 14 May 2012 - 05:18 AM.


#6 radwulf

radwulf
  • Members
  • 7 posts

Posted 26 July 2012 - 11:14 AM

Been a while but I suppose I should tell people how I got around this. Copy the contents of the data folder to the cache folder when installing the mods and it all goes fine and you can delete the cache afterwards. For quick and dirty linux installation instructions (most credit goes to others) try:


install instructions assuming gog version and ubuntu

Using playonlinux:

install
install non listed program
follow instructions to install

start a game to see if its working

download weidu linux and move contents (WeiDu WeInstall tolower, etc) to /usr/bin (use sudo mv in terminal or alt-f2 gksudo nautilus)

download widescreen, ghostdogs-ui, fixpack, unfinished-business and tweak mods

open torment.ini
navigate to planescape directory from filesystem and copy the address
in torment.ini change HD0 to CD5 addresses to the new address prefixed by Z: with CD1-5 ending in /data
for example: HD0:=Z:/home/rafe/PlayOnLinuxDrives/planescapetorment_gog/drive_c/Program Files (x86)/GOG.com/Planescape Torment
CD1:=Z:/home/rafe/PlayOnLinuxDrives/planescapetorment_gog/drive_c/Program Files (x86)/GOG.com/Planescape Torment/data
copy the contents of the data folder to the cache folder

unzip and shift all .tp2 and folder files to planescape directory except for ghostdogs ui
navigate to planescape torment directory with terminal and type tolower then y for both

unzip and open ghostdog until you can see folder .tp2 and weidu
copy directory name and change to it in the terminal, then type:

for file in `find . -type d -name "*'*"` ; do mv -v $file ${file/\'/} ; done
for file in `find . -type f -name "*'*"` ; do mv -v $file ${file/\'/} ; done
find . -name "*'*"
tolower
find . -type f -exec sed -i "s/GhostDog's-PST-UI/ghostdogs-pst-ui/g" {} \;

With tolower only y to the first not the second, otherwise it will error or create an irrelevant linux.ini file

transfer ghostdogs-pst-ui.tp2 and ghostdogs-pst-ui folder to planescape directory

navigate to planescape directory in terminal and type WeInstall widescreen (make sure the resolution you put is supported by your drivers by checking system resolutions under displays)
finish that and then install ghostdog with WeInstall ghostdogs-pst-ui
play game to see if it works

Use WeInstall to install the remaining three mods

delete the contents of the cache folder


You should now have a fully working linux version of planescape torment (fingers crossed)



Reply to this topic



  



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users